• REMALINE 35 - Premium quality for wet wear and build-up
  REMALINE 35 features excellent resistance to wet abrasive and sharp particles. The properties of REMALINE 35 make it the optimum rubber lining for sand and gravel industry equipment as well as in the glass industry. REMALINE 35 linings have also proven valuable with sticky material such as loam and clay.
  Typical areas of application : Pipe linings, Pumps, Slides, gutters and aprons, Loader bucket linings to prevent build-up, Outlet hoses for ready-mix concrete

• REMALINE 40 - The universal lining for many applications
  REMALINE 40 has been designed for a variety of wet or dry applications. In dry applications, REMALINE 40 is frequently used for conveying coke. In wet applications, this material has proven its outstanding worth as a protective coating for sharp particles thanks to its high resistance to tearing.
  REMALINE 40 also features excellent qualities for eliminating bridge formation and build-up. The universal lining for many applications. Typical areas of application : Hydrocyclones, Bucket linings for conveying wet loam/clay, Coating for non-driven pulleys, with low belt tensions (build-up protection), Flexilo and bunker linings

• REMALINE 50 - The highly tear-resistant lining
  REMALINE 50 is suitable for wet and dry applications based on its excellent properties. Thanks to its great elasticity and high tear resistance, it is especially useful for lining pipes, chuts and tanks in power plants and gravel works. Furthermore, it can be used on non-driven pulleys to prevent buildup.
  Typical areas of application Linings for chutes, tanks and outlet funnels, Coating for non-driven pulleys (buildup protection), Lining for pipes (cooling water in power plants).




• REMALINE 60 - The lining for protection from impact wear
  Thanks to its low-abrasion properties, REMALINE 60 is especially suitable for protecting against impact and dry wear and, based on this, is frequently used for conveying coal. Furthermore, non-driven pulleys can be vulcanized with REMALINE 60.
  Typical areas of application : Linings for vibration feeders, slides, bunkers, chutes and sieve tubs, Coating of idler, constriction and bending pulleys for medium to high belt tensions




• REMALINE 70 - Premium quality for extreme wear situations
  REMALINE 70, a material featuring especially excellent resistance to abrasion. REMALINE 70 is the material of choice for applications with extremely high wear and impact. Thanks to its high tear resistance and tensile strength, REMALINE 70 is especially suitable for equipment used to convey large-particle, broken and sharpedged material.
  Typical areas of application : Bunker linings, Material transfer stations, Truck load surface lining. Mill lining, Chute, gutter and funnel linings, Coating for pulleys with high belt tension

• Tough materials against abrasion - REMALOX - nearly as hard as diamond!
  
  REMALOX ceramic is a heterogeneous structure with 92% aluminium oxide content. This gives the required hardness and temperature resistance against highly abrasive materials such as coke, ore and sinter, and makes them nearly immune to abrasion.
  REMALOX ceramic plates are available in a wide variety of shapes and sizes for different applications.
  
  
  
  
  
  

• REMAFLON - The solution for extreme materials flow problems
  Tip Top high-quality REMAFLON linings are a combination of polytetrafluoroethylene and rubber. They feature especially slippery surfaces, thereby preventing extreme build-up and material flow problems.
  Areas of application : REMAFLON ensures perfect protection in most applications where dust or very fine and slightly moist material prone to build-up has to be conveyed. In particular, the PTFE surface of REMAFLON features outstanding anti-adhesive properties, which make the surface even more slippery. This has proven especially useful in the sugar and glass industry, as well as coal processing applications.
  Typical areas of application : Lining for gutters, slides, transfer stations and containers, Coating for walls and outlet elements in glass production, Lining to prevent bridge formation and blockage

• Nordbak® Wearing Compounds utilize the superior wear properties of ceramic and the convenience of two-part epoxies to protect equipment like pumps, chutes, and augers in harsh industrial environments. Available in trowelable and brushable formulations with special fillers for tough conditions, Nordbak products stand up to every corrosion, abrasion, and wear problem you can encounter, and are ideal for all those large-scale repairs that have to last.
  
  

STANDARD

LOCTITE® NORDBAK® WEARING COMPOUND
Large ceramic beads and fine silicon carbide in a high performance epoxy system protects against sliding abrasion to 250°F. Non-sagging. Trowelable.

LOCTITE® NORDBAK® FAST CURE WEARING COMPOUND
A faster curing version of wearing compound, this epoxy renews worn surfaces fast, reducing downtime to put equipment back in service in as little as three hours. Trowelable.

LOCTITE® NORDBAK® HIGH TEMPERATURE WEARING COMPOUND
Resists sliding abrasion and temperatures to 450°F. Must be post-cured for maximum temperature resistance and performance. Trowelable.

LOCTITE® NORDBAK® ULTRA HIGH TEMPERATURE WEARING COMPOUND
Resists sliding abrasion and temperatures to 550°F. Must be post-cured for maximum temperature resistance and performance. Trowelable.

FINE PARTICLE

LOCTITE® NORDBAK® PNEU-WEAR
Filled with small ceramic beads and silicon carbide for maximum protection against fine particle abrasion to 250°F. Trowelable.

LOCTITE® NORDBAK® FAST CURE PNEU-WEAR
Fast cure version of standard Loctite® Nordbak® Pneu-Wear protects against fine particle abrasion to 225°F and cures in just 3 hours. Trowelable.

LOCTITE® NORDBAK®
HIGH TEMPERATURE PNEU-WEAR
Protects against fine particle abrasion and temperatures to 450°F. Must be post-cured for maximum temperature resistance and performance. Trowelable.

LOCTITE® NORDBAK®
ULTRA HIGH TEMPERATURE PNEU-WEAR
Protects against fine particle abrasion and temperatures to 550°F. Must be post-cured for maximum temperature resistance and performance. Trowelable.

SPECIALTY

LOCTITE® NORDBAK®
HIGH IMPACT WEARING COMPOUND
Rubber-modified epoxy protects against sliding abrasion and impact to 250°F. Trowelable.

LOCTITE® NORDBAK® CASTABLE WEARING COMPOUND
For casting wear-resistant parts. Pourable ceramic compound can be cast into any shape. Resists temperatures to 225°F.

LOCTITE® NORDBAK®
COMBO BEAD WEARING COMPOUND
This epoxy system combines the abrasion resistance qualities of both large and small ceramic beads and silicon carbide. Protects against hard sliding abrasion and extends the life of material handling equipment. Trowelable.

 

BRUSHABLE COATING

LOCTITE® NORDBAK® BRUSHABLE AND THIN MIL BRUSHABLE CERAMIC
Brushes on to form a smooth, corrosion-resistant coating. Protects against turbulence, abrasion, and cavitation. Can also be used as a top coat over Loctite® Nordbalc® wearing compounds for surface rebuilding and lasting protection. Resists temperatures to 200°F.

LOCTITE® NORDBAK®
HIGH TEMPERATURE BRUSHABLE CERAMIC
Provides protection against turbulence, abrasion, and cavitation up to 550°F. Must be post-cured for maximum temperature resistance and performance.

LOCTITE® NORDBAK® CHEMICAL RESISTANT COATING
Smooth, glossy, low friction finish protects against turbulence, abrasion, and cavitation. This advanced epoxy protects equipment from extreme chemical attack and corrosion. Low viscosity epoxy can be applied by brush.

WEAR TITLES

LOCTITE® NORDBAK® CERAMIC TILE ADHESIVE
High strength. For securing ceramic wear tiles to vertical, horizontal, and overhead surfaces. Excellent shock and impact resistance. Trowelable. Resists temperatures to 200°F.

• Fixmaster® filled epoxies repair, rebuild and restore damaged parts to quickly return equipment to service. Different fillers provide a range of performance characteristics, making each Fixmaster® epoxy suitable for specific applications. Each product is 100% solids, non-shrinking and capable of bonding to metal, ceramic, wood, glass, and some plastics. Cured epoxies can be drilled, tapped, and machined –just like the original metal.
  
  
  

Epoxies STICKS

LOCTITE® FIXMASTER® METAL MAGIC STEEL™
Steel epoxy in stick form. Cut off a section, knead and apply to leaking pipes or damaged equipment. Cures in 10 minutes. NSF 61 approved for
potable water applications.

LOCTITE® FIXMASTER® CONCRETE REPAIR EPOXY
Enables permanent repairs to concrete and masonry. Convenient stick contains pre-measured portions of activator and base. Once cured can be tapped, drilled, screwed, sawed, filed or painted and will have an appearance and texture similar to concrete.

LOCTITE® FIXMASTER® UNDERWATER REPAIR EPOXY
This putty-like material is ideal for plumbing, irrigation and marine applications because it is unaffected by chlorinated or salt water. Will stick to wet surfaces. Ideally suited for underwater repairs. Sets in 15 minutes.

 

TROWELABLE METAL-FILLED EPOXIES

LOCTITE® FIXMASTER® SUPERIOR METAL
Non-rusting, ferro-silicone-filled epoxy. Extremely high compressive strength and wear resistance. Ideal for rebuilding worn surfaces exposed to harsh environments. Can be machined, drilled and tapped in 6 to 8 hours. For final finish cuts, let the product cure for 24 hrs. and use carbide tooling. Spreadable putty. Sets in 20 minutes.

LOCTITE® FIXMASTER® STEEL PUTTY
Non-slumping, two-part, steel-filled putty. Ideally suited for rebuilding steel surfaces. Can be machined when cured. Sets in 30 minutes.

LOCTITE® FIXMASTER® ALUMINUM PUTTY
Similar to Loctite® Fixmaster Steel Putty, but aluminum filled to better match the coefficient of  thermal expansion of aluminum. Sets in 20 minutes.

LOCTITE® FIXMASTER® STAINLESS STEEL PUTTY
Similar to Loctite® Fixmaster® Steel Putty, but stainless steel filled to better match the coefficient of thermal expansion of stainless steel. Sets in 20 minutes.

LOCTITE® FIXMASTER®FAST SET STEEL PUTTY
Faster setting version of the  Loctite® Fixmaster® Steel Putty. Sets in 3 minutes.

 

POURABLE METAL-FILLED EPOXIES

LOCTITE ® FIXMASTER® STEEL LIQUID
Pourable and self-leveling, steel-filled epoxy. Ideal for casting or making molds. Works well to fill hard-to-reach areas. Can be machined when cured. Will rust. Sets in 25 minutes.

LOCTITE® FIXMASTER® ALUMINUM LIQUID
Similar to Loctite® Fixmaster® Steel Liquid, but aluminum filled. Sets in 20 minutes.

GENERAL PURPOSE EPOXIES LOCTITE®  FIXMASTER® POXY PAK™
This fast cure, general purpose epoxy bonds virtually any material. It will also fill or seal cracks and rebuild worn surfaces. Comes in a 1 oz. syringe with a built-in plunger for easy dispensing without equipment. Working time is approximately 4 minutes.

LOCTITE® FIXMASTER® 4 MINUTE EPOXY
Cartridge-based, general purpose, two-part epoxy. Ideal for emergency repairs or where fast cure time is required. Sets in 5 minutes. Requires hand held dispenser P/N 98427 and mix nozzle P/N 98455

LOCTITE®  FIXMASTER® GENERAL PURPOSE EPOXY (MIXER CUPS)
Premeasured epoxy mixer cups. One hour working time. Fills porosity and cracks. Ideally suited for applications that only require a small amount of epoxy. Adheres to metal, glass, wood, and hard plastics. Sets in 60 minutes.

LOCTITE® FIXMASTER®
FAST CURE EPOXY (MIXER CUPS)
Faster setting version of Loctite® Fixmaster® General Purpose Epoxy. Sets in 5 to 15 minutes.

 

SPECIALTY PRODUCT'S

LOCTITE® FIXMASTER® HIGH PERFORMANCE EPOXY
Fiberglass-reinforced epoxy offering exceptional shock resistance and outstanding tensile strength. Ideal for creating tough permanent bonds on metals, wood, glass, and hard plastics. Comes in 50 ml cartridges, 1 oz. syringes and 2 gallon containers. The cartridge requires the hand held dispenser P/N 983531. Cartridge comes bundled with one mix nozzle. Sets in 30 minutes.

LOCTITE® FIXMASTER® FAST SET STEEL EPOXY
Cartridge-based, steel-filled epoxy. Makes fast, cost effective repairs. Easy-to-use and easy-to-apply. Ideal for metal parts that must be back in service quickly. Can be machined when cured. Requires the hand held dispenser, item 983531. One mix nozzle comes included with the cartridge. Sets in 3 minutes.

LOCTITE®  FIXMASTER® WEAR RESISTANT PUTTY
Ceramic fibers give this trowelable putty excellent wear and abrasion resistant properties. Cures to a smooth, low friction surface. For surfaces exposed to wear, erosion, and cavitation.

LOCTITE® FIXMASTER®
WET SURFACE REPAIR PUTTY
Use this unique, trowelable epoxy to repair and rebuild wet, even underwater surfaces. Bonds to most metals, concrete, and some plastics.

LOCTITE®  FIXMASTER® 20000 PUTTY
Single component putty designed to fill and restore damaged metal and fill cracks in environments that will see 2000°F. Water based and non-toxic. Typical applications include header, manifold and cast iron repair.