CALENDAR EVENT EXHIBITION
Supra will participate in the Mining Indonesia 2009, 14-17 October2009. Mining Indonesia is the largest Mining Exhibition in the region. Mining Indonesia 2009 has reservations from mining suppliers worldwide. Government backed groups from: Australia, Canada, Germany, Poland and UK plan to exhibit with bigger paviilions alongside industry majors... details »
Transfer Point & Sealing System
By preventing spillage and airborne dust, Martin Engineering's Transfer Point technologies will reduce belt conveyor equipment damage, reduce cleanup, control maintenance expenses, and improve the safety of personnel. Martin Engineering have created and implemented a comprehensive approach to improving belt conveyor transfer point performance.
Preventing the escape of dust and fines is the job of the transfer point sealing systems. Installed along the sides of the belt, the skirtboard sealing systems must combine effective containment of fines with an extended service life and low maintenance requirements. A MARTIN®Tailgate Sealing System completes the enclosure to contain the dust
Transfer Point & Sealing System category
 |
 |
 |
 |
Air-Supported Conveyor Systems
System is suitable for new conveyor construction or as an economical upgrade for existing troughed idler conveyors.
Instead of using idlers, the MARTIN® S-CLASSTM Conveyor System supports the belt with a 1/32-inch (1-mm) cushion of air supplied by a low-horsepower centrifugal fan. This air-supported system reduces friction and stabilizes the belt path to prevent spillage and load segregation. The totally-enclosed MARTIN® S-CLASSTM Conveyor System acts as its own ductwork to prevent the escape of airborne dust.
- Cuts Power Consumption
Air from a low-power fan supports the belt with less friction and less power demand than idler conveyors. - Controls Dust and Spillage
Fully-enclosed conveyor with stable belt path means no dust to collect, no spillage to clean up. - New Construction or Retrofit
Modular sections make economical retrofit of CEMA-standard conveyors. Rugged plenum design saves money in new construction too. - Light yet Sturdy
Lightweight to be installed easily, yet strong enough to handle heavy materiaL
MARTIN® INERTIAL FLOW Transfer Chute Technology
Reduce the escape of dust and improve conveyor performance by confining the flow and minimizing impact, turbulence, material degradation, and air entrainment.
MARTIN® Transfer Points are custom-engineered by Martin Engineering to eliminate blockages, reduce impact, centralize loading, and guarantee the material flow rate. Designed to minimize the generation and escape of airborne particles, they are especially suited for handling friable, dusty material such as PRB coal without requiring "baghouse" dust collection systems.
- Controls Dust without Baghouses Eliminates the need to install or expand "baghouse" dust collection systems.
- Improves Loading
MARTIN® INERTIAL FLOWTM Transfer Technology controls load placement, reduces impact to extend belt life and decrease spillage and dust generation - Cuts Maintenance Costs
System keeps fine particles in main material stream without consuming power to drive dust collectors and requiring bag cleaning. - Eliminates Plugged Chutes
Engineered flow pattern keeps material moving and allows conveyors to achieve design capacities
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |