CALENDAR EVENT EXHIBITION
Supra will participate in the Mining Indonesia 2009, 14-17 October2009. Mining Indonesia is the largest Mining Exhibition in the region. Mining Indonesia 2009 has reservations from mining suppliers worldwide. Government backed groups from: Australia, Canada, Germany, Poland and UK plan to exhibit with bigger paviilions alongside industry majors... details »
locking assembly
Special Solution Locking Assemblies
Where the use of standard Locking Assemblies is not sufficient we develop special solutions optimised to specific customer requirements so that the parts are ideal for the specific application. In this way it is possible to make use of applications which were not previously possible.
Characteristics
As the industry standard the RfN 7012 stainless Locking Assembly is suitable lor most applications.
 |
Special Features Bending moment and radial loads - Combined loads can be transmitted, please contact our specialist for assistance. Low risk to contamination -during tightening process the functional surfaces ot the device and connsection are pressed together generating a surface pressure that does not allow the ingress of contamination. Adjustable transmission values - the locking screw torque can be changed giving a corresponding change in transmission values. RfN 7012 stainless Locking Assemblies can be tightened and released repeatedly. |
Example applications: chain wheels, levers, pulleys, slip-on gear mechanisms, belt drums, running wheels, cable sheaves
Characteristics
Precision Locking Assembly for the transmission of maximum torques and axial forces with special demands on the concentricity of the parts of the clamped, as well as for applications subjected to bending moments.
 |
Special Features Bending moment and radial loads - Combined loads can be transmitted,please contact our specialists for assistance. During installation the Locking Assembly shaft and hub remain in position to one another. The shaft and hub are only compression-loaded, providing additional safety compared to 3-part versions. Excellent centering ability - with relatively a wide design (giving increased guiding lengths) and the precentering web the RfN 7015.0 Locking Assembly has excellent centering ability.
|
Characteristics
 |
|
Characteristics
Locking Assembly for transmission of torques, axial forces and high bending moments at reduced contact pressures, with special requirements to the true running of the clamped pieces.
 |
Special Features Bending moment and radial loads - Combined loads can be transmitted, please contact our specialists for assistance. Excellent centering ability - with relatively a wide design (giving increased guiding lengths) and the precentering web the RfN 7015.1 Locking Assembly has excellent centering ability.
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |