RIBBED RIGID

• Rated Load Capacities of 1018 Shafting
• Connects same diameter shafts via compres¬sion fit clamping
• Accommodates up to 7" bores and 404,000 in. lbs.

D-FLEX

• Available in Type J, S, B and SC Spacer Flanges:
• Sleeves available in EFDM, Neoprene & Hytrel
• AGMA 9 balance for Type S and SC Flanges
• Set-screws at 65o apart offers 10% greater holding force on shaft
• Accommodates up to 6" shafts and 72,480 in. Ibs

TAPER LOCK RIGID

• TL Bushing connects varying diameter shaft sizes
• Flanges are all machined, and require no maintenance
• Accommodates up to 6" bores and 254,500 in.lbs.

PARA-FLEX

• Industry leading misalignment (4o Angular, 1/8" Parallel & 5/16" End Float)
• Available with Finished Bore, Taper-Lock & GRIP TIGHT flanges
• Elements available in Standard Rubber, Neoprene & Cordless
• Fast installation on misaligned shafts
• Accommodates up to 8" shafts and 453,000 in. lbs.

POLY-DISC

• Polyurethane flexible disc resists chemical attack

• Allows 2o of angular misalignment & cushions shock loads
• Accommodates up to 3-1/4" bores and 10,900 in. Ls.

POWERPLUS

• Power dense elastomeric coupling
• Low cost, low maintenance and fast installa­tion alternative to Grid and Gear Couplings
• Accommodates up to 5.71" bores and 146,926 in. lbs.

GEAR

• Power dense coupling
• Interchangeable with industry standard gear couplings
• Accommodates up to 12-1/4" bores and 1,008,400 in. lbs.

FLUID (Coupling)

• Mechanical Soft Sart via Oil fill
• Available in standard and delay fill
• Available in Drive style (Sheave) & Coupling (Para-Flex & Gear)

TORQUE TAMER

• Cost effective mechanical overload clutch
• Available with many sizes of sprockets
• Accommodates up to 3" bores and 11,600 in. lbs.

MOTOR BRAKES

• Available with Fan End and Shaft Out (Double C-Face) mounting
• Housing enclosure: Standard Drip Proof & E-Z Kleen (Nema 4X)
• Available for NEMA 56C, 143TC, 145TC, 180TC & 210TC

CHAIN

• Available with Reborable, Finished Bore or TL Flanges
• Compact design offers high torque capability
• Accommodates up to 3-7/16" bores and 1,273 HP applications

FLYWHEEL

• Flexible element connects to standard SAE flywheel bolt patterns
• SAE bolt circle diameters from 8-3/4" to 25-1/4"
• Accommodates up to 6-7/8" bores and 85,050 in. lbs.

SHAFT & FLANGE MOUNTED CLUTCHES AND BRAKES

• Clutches accepts standard Sheaves, Sprockets and Gears
• Can be mounted on standard motor or thru shafts
• Accommodates up to 1-11/16" bores and 175 Ib-ft

FRACTIONAL HP CLUTCHES & BRAKES

• Clutches available as couplings or with sheave/sprocket mount
• Brakes available as both 'Power On' and 'Power Off'
• Accommodates up to 1" bores and 6.5 in. Ins.

CLUTCH/BRAKE MODULES

• Available in Clutch Only, Brake Only, Brake Only (less output shaft) and Clutch & Brake
• Available with Double C-Face mounting, or Shaft-In (Base mounted)
• Available for NEMA 56C, 143TC,145TC, 182TC, 184TC, 213TC and 215TC motors

GRID-LIGN

• Available as a closed coupling or spacer coupling
• Flexible tapered grid isolates vibrations & cushions shock loads
• Accommodates up to 7-1/4" bores and 230,000 in. Ins.

FLEXIDYNE

• Mechanical Soft Sart via Flow Charge (cast steel pellets) fill
• 100% efficient, no slippage
• Available in three designs: Drive, Coupling & C-flex