CHEMOLINE 3
Polymer:                                   
Chemically resistant against:     
Continuous use temperature :    
Applications / Miscellaneous  :     content :

Polychloroprene rubber (CR)
Caustic soda solutions, acids and wastewater                                        
80° C
Oil-resistant and abrasion-resistant against media with a high solids content. DIBt approval: Z-59.22-165

CHEMOLINE 4 A/ 4 8/ 4 CN

Bromobutyl rubber (BIIR)
Mineral acids, bases, polar solvents, aqueous phases and also excellent diffusion resistance to gases such as sulphur dioxide and nitrogen oxides
100° C
Various uses, e.g. in flue-gas desulphurisation, in brown-coal power stations, mineral processing. Available as pre-vulcanised, self-vulcani­sing or autoclave variants. DlBt approval: Z-59.22-159, Z-59.22-149, Z-59.22-162

CHEMOLINE 8 / 8 CN

Chlorosulphonated polyethylene (CSM)
Mineral acids, bases, polar solvents, aqueous phases and hypochlorite solutions Continuous use temperature                    
80° C
Particularly suitable for road tankers and tank wagons DIBt approval: Z-59.22-234

CHEMOLINE 10

Chlorobutyl rubber (CIIR) / Polychloroprene rubber (CR)
Mineral acids, bases and aqueous phases
Up to 85° C
Wide use in the chemical, chlorine and steel industries, in mineral processing and flue-gas desulphurisation in brown-coal power stations

CHEMOLINE 61 / 61 CN

Isobutylene-isoprene rubber (IIR) / Polyvinylchloride (PVC)
Mineral acids, bases, aqueous phases and mixed acids
70° C
Especially with oxidising media such as nitric acid and chromic acid as used in precious-stone treatment. Available as prevulcanised or autoclave variants.

CHEMOLINE 70 / 70 CN

Chlorobutyl rubber (CIIR) / Polyvinylchloride (PVC)
Mineral acids, bases, aqueous phases and in particular concentrated hydrochloric acid Continuous use temperature
70° C
Widely used in electroplating and particularly where hydrochloric acid is contacted

CHEMONIT 31
Polymer:                                   
Chemically resistant against:     
Continuous use temperature :    
Applications / Miscellaneous  :    

Natural rubber (NR) Mineral acids, bases, aqueous phases and organic chemicals.
100° C
Diverse components in the chemical, chlorine and steel industries, in mineral processing, electroplating and environmental protection. Available as hot water variant for construction site application. DIBt approval: Z-59.22-140, Z-59.22-240

CHEMONIT 33

CHEMONIT 34

Isoprene rubber (IR) / Styrene-butadiene rubber (SBR)
Mineral acids, bases, aqueous phases and in particular excellent resistance against moist chlorine
100° C
Components subject to high chemical-thermal loads in the chemical, chlorine and steel industries, in mineral processing, electroplating a-environmental protection. Available as hot water variant for construction site DIBt approval: Z-59.22-253

CHEMONIT 35

Isoprene rubber (IR) / Styrene-butadiene rubber (SBR)
Mineral acids, bases, aqueous phases and in particular excellent resistance against moist chlorine
100° C
Wide application possibilities for components subject to high chemical-thermal loads. The particularly long shelf life and the possibility o' autoclave, hot water or steam vulcanisation makes Chemonit 35 particularly suitable for construction site applications

CHEMONIT 3 B

Natural rubber (NR)
Mineral acids, bases and aqueous phases 100° C
100° C
Wide use in diverse chemical plants. DIBt approval: Z-59.22-167

CHEMONIT 181

Isoprene rubber (IR) / Styrene-butadiene rubber (SBR)
Mineral acids, bases, aqueous phases and organic aldehydes
100° C
Particularly suitable for drinking water. Available as hot water variant for construction site  DIBt approval: Z-59.22-142/KTW/KSW DVGW worksheet W 270

COROFLAKE 18
Polymer:                                   
Chemically resistant against:     
Continuous use temperature :    
Applications / Miscellaneous  :    

Novolac vinyl ester / C-glass flakes
Inorganic acids, aliphatic and aromatic solvents  
90° C wet (without insulation), 160° C dry

COROFLAKE 23

Novolac vinyl ester / C-glass flakes
Organic and inorganic acids, aliphatic and aromatic solvents
70° C wet (with insulation), 180° C dry
Suitable for FGD raw gas and bypass ducts and wastewater containers

COROFLAKE 24

Bisphenol A vinyl ester / Inert flakes
Acids, alkalis and hypochlorite
70° C wet (with insulation), 120° C dry
Suitable for FGD raw gas and bypass ducts and for concrete protection

COROFLAKE 28

Novolac vinyl ester / C-glass flakes
Organic and inorganic acids, aliphatic and aromatic solvents
70° C wet (with insulation), 180° C dry
Suitable for FGD raw gas and bypass ducts and for concrete protection

COROFLAKE 29

Special vinyl ester / C-glass flakes
High concentrations of sulphuric acid
acid 70° C wet (with insulation), 230° C dry
Suitable for FGD raw gas and bypass ducts

COROFLAKE 48

Modified vinyl ester / C-glass flakes
Chlorinated, aliphatic and aromatic solvents
70° C wet (with insulation), 200° C dry
Suitable for FGD raw gas and bypass ducts and wastewater containers

COROFLAKE 63

Epoxy phenolic / Inert flakes
Crude oil, Skydrol, petroleum and unleaded petrol
55° C wet (without insulation), 155° C dry
Suitable for almost all installations in the petrochemical industry

COROFLAKE 650 FDA

Epoxy resin / Inert flakes
Alkalis and dilute organic acids
50° C wet (without insulation), 110° C dry
Suitable for drinking water and for use in the food industry KTW approved.

COROFLAKE 200

Novolac epoxy resin / C-Glass flakes
Alkalis and acids particularly high concentrations of sulphuric acid
60° C wet (without insulation), 95° C dry
Suitable for pump bases, channels and collection basins exposed to 98 % HZSOa

TIP TOP LINING 65
Polymer:                                   
Chemically resistant against:     
Continuous use temperature :    
Applications / Miscellaneous  :    

Bisphenol-A vinyl ester/ 2 glass mats / 1 surface tissue / Silica
Organic acids, alkalis and hypochlorite
80° C wet (without insulation), 120° C dry
Suitable for components in chemical and pulp industry installations

TIP TOP LINING 74

Novolac vinyl ester / 2 glass mats / 1 surface tissue / Silica        
Organic and inorganic acids, aliphatic and aromatic solvents
80° C wet (without insulation), 160° C dry
Crack-bridging laminate coating, DIBt approval Z-59.12-298

TOPLINE W

Bisphenol-A vinyl ester / 1 glass mat / silica and aluminium oxide
Acids, alkalis and suspensions
75° C wet (without insulation)
For installations subject to a high level of abrasion

COROPUR Ferro / Ferro LS
Polymer:                                   
Chemically resistant against:     
Continuous use temperature :    
Applications / Miscellaneous  :    

Moisture-hardening aromatic polyisocyanate (type Ferro), moisture-hardening aliphatic polyisocyanate (type Ferro LS)
Excellent corrosion protection in industrial and marine atmospheres
120° C dry
Civil engineering bridges, masts, steel constructions / Plant construction: containers, cranes, tanks, sewage treatment works, waste disposal plants

COROPUR Cover RAL

Aliphatic, moisture-hardening polyisocyanate / organic and inorganic pigments
Atmospheric corrosion protection with very good light and weather resistance various Colour (RAL) and gloss levels are available.
140° C dry
Particularly suitable for harbour facilities and crane installations, constructional steelwork, piping and off-shore installations. Plant construction: containers, cranes, tanks, sewage treatment works, waste disposal plants.

COROPUR Tar / Tar 21

Moisture-hardening polyisocyanates and tar, together with fillers and micaceous iron oxide.
Good chemical resistance and low water vapour diffusion.
80° C dry, short-term 100° C
Particularly suitable for use in steel water construction acc. to DIN EN ISO 12944-5 corrosivity categories Im1, Im2 and Im3.

REMACOAT A-60
Polymer:                                     
Continuous use temperature :    
Applications / Miscellaneous  :    

Diphenylmethane-diisocyanate (isomers and homologues) / Mixture of polyoxyalkylamines
40° C wet /-40° C...+130° C (short-term 150° C) dry
Excellent resistance to weather under high ozone concentrations and under dynamic burdening.

REMACOATA-70 S

Diphenylmethane-diisocyanate (isomers and homologues) l Mixture of polyoxyalkylamines
40° C wet /-40° C...+130° C (short-term 150° C) dry

REMACOATA-80

Diphenylmethane-diisocyanate (isomers and homologues) / Mixture of polyoxyalkylamines
40° C wet /-40° C...+130° C(short-term150° C) dry
High mechanical strength and optimal sliding and wet abrasion resistance.

REMACOATA-80

Diphenylmethane-diisocyanate (isomers and homologues) / Mixture of polyoxyalkylamines
Dilute acids (inorganic and organic) and alkalis, diverse types of oil and aqueous phases at 50° C (wet).
50° C wet /-40° C...+130° C (short-term 150° C) dry
DIBt approved (Z-59.12-305) as organic surface protection for concrete acc. to 19 L of the German water ecology act. Particularly suitable for wastewater systems and LAU installations.